2K Urethane Chip Guard Kit

2K Urethane Chip Guard is a job-sized, two-component, shake-and-shoot, textured coating for reproducing a variety of OE textures and chip guards. Two-component system helps eliminate common problems seen with one-component products, such as long flash times, pinholes, solvent trap, delamination, and solubility.

Features:

• OEM recommended
• 2K durability with 1K convenience
• Reproduces fine to coarse and light to heavy OE textures
• Builds heavy textures without trapping solvent
• No flash time required between coats
• 50 state compliant
• Pinhole free
• Easy-to-use shake-and-shoot system
• R.O. billable unit
• 16 defined textures with detailed instructions
• Non-yellowing and non-staining
• Tintable, paintable, or can be used as a textured top coat
• Impact and chemical resistant
• Excellent for sound dampening

Applications:

• Steel
• Aluminum
• Galvanized steel
• Existing OEM paint
• Polyester fillers
• E-coat
• Fiberglass
• SMC and FRP
• Epoxy primer
• 2K urethane primer and sealer

Properties:

• Opaque gray
• 12 oz. (mixed) kit
• Produces a variety of textures
• Pot Life @ 70°F and 50% R.H.: 20 minutes
• Flash Time: 0 – 20 minutes
• Paint Time: 20 minutes – 4 hours