NMEA Cables & Sensors

Maretron Mid Double-Ended Cordset - 0.5 M BlueMechanical:Contact Carrier Mat/Color: Thermoplastic PUR/Blue-GrayMolded Body Mat/Color: Thermoplastic PUR/Blue-GrayContact Mat/Plating: Brass/GoldCoupling Nut Mat/Plating: Brass/NickelConnector Outside...

Maretron Mid Double-Ended Cordset - 2 M GrayMechanical:Contact Carrier Mat/Color: Thermoplastic PUR/Blue-GrayMolded Body Mat/Color: Thermoplastic PUR/Blue-GrayContact Mat/Plating: Brass/GoldCoupling Nut Mat/Plating: Brass/NickelConnector Outside...

Mid Double-Ended Cordset - 1 Meter - GrayDouble-ended cordsets are used for trunk or drop lines and make for a secure connection and simple timesaving installation. The connectors are keyed for error-free connection and are waterproof for continued...

Maretron NM-NM Mini Gender Changer, Male to MaleMaretron cables have a male connector on one end and a female connector on the other end. Normally, the male connector points back towards the network power supply, but on some occasions, this gets...

Maretron NM-CF Mini Male to Micro Female ReducerThe reducer is used to change from a Mini cable to Micro or Mid cable. For example, one end of the network might be terminated at the top of the mast but it may not be desireable to run a Mini trunk cable...

Mini Gender ChangersMaretron cables have a male connector on one end and a female connector on the other end. Normally, the male connector points back towards the network power supply, but on some occasions, this gets reversed and a gender changer can...

Current Transducer with Cable - 400 AmpMaretron's Current Transducer is used specifically with Maretron's ACM100 Alternating Current Monitor.Features:400 AmpIncludes CableWARNING: This product can expose you to chemicals including NICKEL (METALLIC)...

Raymarine SeaTalkng Starter Kit SeaTalkng is a robust cabling and connection system compatible with NMEA 2000, built specifically for the marine environment comprising a powered single backbone with two terminators, one at each end. The SeaTalk to...

Raymarine In-Line TerminatorIn-Line SeaTalkng Terminator f/Long Cable Runsold part number a80001 , now its a06074

SeaTalk 1 to SeaTalkng Converter KitThe SeaTalk 1 to Seatalkng converter allows select SeaTalk 1 devices to interface and communicate on the Raymarine SeaTalkng data network. It is compatible with legacy ST40, ST60+, Raystar 125 GPS sensors and LifeTag...

SPL2000 AIS-VHF Antenna SplitterThe SPL2000 allows the boat's VHF antenna to be used for both an AIS and VHF simultaneously. It uses ZeroLoss technology and is suitable for use with AIS Class B transponder systems as well as AIS receivers. It's also...

Bilge High Water DetectorPart #: BHW100Used with SIM100 Switch Indicator Module to detect high bilge water.WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more...