Transducer Accessories

CPT-DV/CPT-DVS Mounting KitTransom Mount Bracket for CPT-DV & CPT-DVS Specifications:Type: Mounting BracketsBox Dimensions: 2"H x 6"W x 9"L WT: 0.2 lbsUPC: 723193795842

Bare Wire Transducer to 12-Pin Sounder Wire Block AdapterConnect a compatible bare wire transducer to a Garmin 12-pin sounder connector with this wire block adapter.Compatible Devices:GPSMAP® 7607xsv, 7608xsv, 7610xsv, 7612xsv & 7616xsvGSD™ 25...

4m Extension Cable f/CPT-DV & DVS Transducer & Dragonfly 4, 5 & Wi-FishUse Raymarine's 4m cable to extend the length of the standard cable provided with Dragonfly CPT-DV and DVS transducers. Specifications:Type: ExtensionBox Dimensions: 1"H x...

164WR-3 Double Handle Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches are constructed of 3/16" thick mild steel...

75WR-3 Double Handle Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches are constructed of 3/16" thick mild steel...

60WR-3 Double Handle Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches are constructed of 3/16" thick mild steel...

60WR-1 Crows Foot Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches are constructed of 3/16" thick mild steel. They...

Trolling Motor BracketTrolling Motor Bracket specifically designed for the Dragonfly CPT-DV and CPT-DVS transom mount transducers. Specifications:Type: Mounting BracketsBox Dimensions: 1"H x 6"W x 9"L WT: 0.2 lbsUPC: 723193796177

175WR-4 Transducer Housing WrenchA single-handed wrench that holds the main thru-hull housing via the 'wrench flats' on the top of the housing to facilitate tightening of the hull nut. Use wrench 164WR-2 or 164WR-3 for the hull nut.For use...

60WR-4 Transducer Housing WrenchA single-handed wrench that holds the main thru-hull housing via the 'wrench flats' on the side of the housing to facilitate tightening of the hull nut.Use wrench 60WR-2 or 60WR-3 for the hull nut.For use with:B60SS60...

8-Pin Transducer to 12-Pin Sounder Adapter Cable w/XIDUse this adapter cable to connect an 8-pin transducer with XID to a 12-pin sonar port on a compatible marine device.WARNING: This product can expose you to chemicals which are known to the State of...

12-Pin To Dual 4-Pin Transducer Y-CableUse this adapter cable when connecting a compatible 12-pin transducer to a compatible 4-pin Garmin device.WARNING: This product can expose you to chemicals which are known to the State of California to cause...